Forever Pallet

Step 1: Stain 4 x 6 Wood Pallet with the Gel Stain. Let dry.

Step 2: Position adhesive stencil over pallet and dry brush on white Ultra Chalk Paint over the surface.

Step 3: Use the Groove Tool with the course sanding tip attached and sand the surface of the pallet to distress the edges.

Step 4: Use a paper trimmer to trim the corrugated cardboard to the same width as the tag included in the Lace Ephemera College Kit. For the length, tear the corrugate to length and adhere to top of tag with adhesive or staple in place.

Step 5: Switch out the tip of the Groove Tool to the Foam Applicator and ink the edges of the tag with brown ink. Sand if desired.

Step 6: Attach the Chevron Tag to the pallet with foam tape.

Step 7: Trim a piece of burlap from the Lace Ephemera College Kit to the desired size and position over top of the Chevron Tag, use hot glue to secure.

Step 8: Remove the hook from the Gator Clip and hot glue to the pallet as shown in the example.

Step 9: Attach the two flowers with craft or hot glue. Add a drop or two of silver paint to the center of each and let dry.

Step 10: Use the hole punch to punch out photograph sized to fit in the center of the doily and attach with foam tape. Add to  pallet, positioning at the end of the tag as shown.

Step 11: Add “forever” strip.

 

 

 

 

 

Designed By: Catherine Scanlon
Skill Level (1-5): 2
Time to Complete: 1 hour (allowing for drying time)

Instructions

Step 1: Stain 4 x 6 Wood Pallet with the Gel Stain. Let dry.

Step 2: Position adhesive stencil over pallet and dry brush on white Ultra Chalk Paint over the surface.

Step 3: Use the Groove Tool with the course sanding tip attached and sand the surface of the pallet to distress the edges.

Step 4: Use a paper trimmer to trim the corrugated cardboard to the same width as the tag included in the Lace Ephemera College Kit. For the length, tear the corrugate to length and adhere to top of tag with adhesive or staple in place.

Step 5: Switch out the tip of the Groove Tool to the Foam Applicator and ink the edges of the tag with brown ink. Sand if desired.

Step 6: Attach the Chevron Tag to the pallet with foam tape.

Step 7: Trim a piece of burlap from the Lace Ephemera College Kit to the desired size and position over top of the Chevron Tag, use hot glue to secure.

Step 8: Remove the hook from the Gator Clip and hot glue to the pallet as shown in the example.

Step 9: Attach the two flowers with craft or hot glue. Add a drop or two of silver paint to the center of each and let dry.

Step 10: Use the hole punch to punch out photograph sized to fit in the center of the doily and attach with foam tape. Add to  pallet, positioning at the end of the tag as shown.

Step 11: Add “forever” strip.

 

 

 

 

 #26394 Art-C 3 x 5 Wood Pallet

#24576 Art-C White + Kraft Doily Pack

#25060 Art-C Lace Ephemera College Kit

#26063 Art-C Chestnut Gel Stain

#25855 Art-C Ultra Chalk: White

#25990 Art-C Metallic Paint: Silver

#23664 Art-C Gator Clips. Antique Silver

#24486 Art-C Groove Tool

#25229 Momenta Chevron Adhesive Stencil

What You Need

#26394 Art-C 3 x 5 Wood Pallet

#24576 Art-C White + Kraft Doily Pack

#25060 Art-C Lace Ephemera College Kit

#26063 Art-C Chestnut Gel Stain

#25855 Art-C Ultra Chalk: White

#25990 Art-C Metallic Paint: Silver

#23664 Art-C Gator Clips. Antique Silver

#24486 Art-C Groove Tool

#25229 Momenta Chevron Adhesive Stencil

Other Supplies

Paper Trimmer

Circle Punch

Photo

Hot Glue Gun / Glue

Foam Tape

Stapler